Language: ChineselineEnglish

CNC System

  • XC899M series drilling and tapping multi-function and multi-purpose numerical control system
  • XC899M series drilling and tapping multi-function and multi-purpose numerical control system
XC899M series drilling and tapping multi-function and multi-purpose numerical control systemXC899M series drilling and tapping multi-function and multi-purpose numerical control system

XC899M series drilling and tapping multi-function and multi-purpose numerical control system

  • XC899M
  • Product description: XC899M series drilling and tapping multi-function and multi-purpose numerical control system
  • INQUIRY
1.1 System Overview
XC899M drilling and tapping multi-function multi-purpose numerical control system is a new generation numerical control system developed by our company. Support boring, tapping, drilling processing and automatic feeding. Using 32-bit high-performance microprocessor, the use of real-time multi-task control technology and hardware interpolation technology, full linkage, 0.001mm interpolation accuracy, the highest speed of 30 meters/min. It is the best choice for CNC drilling machine, special machine tool, automation equipment, feeding robot and so on.
XC899M numerical control system hardware and software features:
★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed of 30 m/min, support direction + pulse and orthogonal pulse.
★ Can run 3 programs at the same time (1 main program, 2 sub-programs), convenient processing, feeding, unloading program writing.
★ 8.4 inch color widescreen LCD, resolution 800×600, Windows interface style. Equipped with 8 soft function keys, easy to operate and learn. Provide parameter classification, alarm log, system diagnosis and other rich display interface, convenient debugging and maintenance.
★ International standard G instruction, compatible with FANUC system instruction.
★40 kinds of G instructions, support drilling cycle, tapping cycle.
★ Support RS485 absolute value servo.
★ Parts program full screen editing, built-in 500M massive program space, can store N parts program.
★ With USB interface, support U disk file read and write, data backup.
★ Input 24(expandable to 96) points, output 24(expandable to 96) points (custom), flexible and convenient.
★ Chinese/English operation interface, complete help information, more convenient operation.
★ The system adopts acceleration and deceleration control before interpolation.
★ Support multi-level operation rights, convenient device management, with a limited time system lock function.
★ Support UG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wenthai and other third-party software G code files.
★ Support self-programming knife library, flexible use of a variety of knife libraries.

1.2 Technical Specifications
Basic function
Number of control axes 2~6 axes (X, Y, Z, A, B, C)
The number of linkage axes is fully interconnected
Knife library support, need to edit knife library code
Spindle 3-way spindle, 2-way analog spindle, can also be configured as 3-way servo spindle, in the 3-way digital spindle configuration mode, can achieve 3-channel synchronous or asynchronous tapping.
Spindle monitor
Minimum instruction unit 0.001 mm
Maximum instruction value ±99999999 x minimum instruction unit
Fast feed speed 30000 mm/min
Fast feed rate F0, 25%, 50%, 75%,100%
Pulse mode 1: Direction + pulse 2: orthogonal pulse (if the driver supports, recommended, stronger anti-jamming) 3: dual pulse, compatible with old stepper drives
Maximum frequency 100Khz,250Khz,500KHz can be set. (500KHz only orthogonal output pulse)
Feed speed ratio 0 ~ 150%
Electronic gear ratio 1 ~ 65,55:1 ~ 65,535
Automatic acceleration and deceleration
Positioning G00 (linear interpolation positioning)
Interpolation line (G01), arc (G02/G03/G12), helix interpolation
Return to Reference Point Automatic Return to Reference Point (G28)
LCD 8.4-inch TFT LCD with 800X600 resolution
MDI software keys 8
Step x1, x10, x100
Communication port USB flash drive port
External handwheel interface is available
I/O interface 24/24(expandable to 96/96)
Pause (seconds) Yes
Quasi-stop state Yes
quasi-stationary
Storage trip check yes
MDI operation has, support multi-stage operation
reset
The jump switch is available
Single segment run has
Program protection switches are available
Self-diagnosis function is available
Emergency shutdown
Single-phase AC220V+10%-15%, 50Hz±1Hz
Coordinate system Machine coordinate system (G53), workpiece coordinate system (G92, G54 ~ G59), local coordinate system (G52), coordinate system plane specified
Automatic coordinate system Settings have
The decimal point input has
Auxiliary function
Auxiliary function M2 number, M code custom, manual /MDI/ automatic control spindle forward, reverse, stop; Control coolant start and stop; Control lubrication start and stop, etc
Spindle function
Spindle function 3 spindles
Digital spindle 3 Digital spindle (Z-axis not supported), speed is more stable.
Tapping supports up to 3-channel tapping (in 3-way digital spindle configuration mode)
Spindle analog output has, spindle 1, spindle 2 analog
Tool function
Tool function support automatic tool change, support the center of the knife, three points to set the center of the knife
Tool compensation memory -9999.999 ~ 9999.999, 99 pieces
Tool compensation each shaft length compensation
Edit operation
Edit function parameters, diagnostic input by bit, program editing, MDI multi-program segment execution
Storage capacity 500M
Number of stored programs N
Program name display Chinese, English, numbers, combinations
Line lookup has
Skip any optional program segment there
Program switch yes
reveal
Display languages Chinese, English
Processing time and number of parts are displayed
Spindle speed, M/S instruction has
Host size (mm)
Overall dimensions (height × width × thickness) 400×265×80
Opening size (H x W) 388 x 248

CONTACT US

Contact:

Phone: 13812080602

Tel: 0510-85586857

Email: xcmcu@126.com

Add:

Scan the qr codeClose
the qr code